﻿The behaviour at the beginning of the disabling function can be specified separately for the brightness control and optionally - if the groups and single devices have this range of functions - also for the colour temperature control and colour control. This parameter defines the behaviour of the colour temperature at the beginning of the disabling function.

*Preset*: The colour temperature specified by the "Colour temperature" parameter is set at the beginning of the disabling function.

*Memory value (colour temperature as before last switch-off)*: The colour temperature value is set that was active before the last switch-off and stored internally in the device. This memory value is stored in a non-volatile manner in the gateway so that the value is retained after the bus or mains voltage returns. After ETS programming, the memory value is predefined to "minimum colour temperature".

*No reaction*: The operating devices of the disabled group or the single device do not react. The devices remain in the colour temperature state last set.
